M-LOK Type 1 Rail Covers are low-profile and light weight covers that install directly onto M-LOK compatible systems. Made of an extremely heat resistant flexible material, these covers offer an enhanced gripping surface. At 9.5 in length, they cover six full M-LOK slots but can be cut for customized length or to combine colors. Includes two Covers per package.

M-LOK Type 1 Rail Covers are low-profile and light weight covers that install directly onto M-LOK compatible systems. Made of an extremely heat resistant flexible material, these covers offer an enhanced gripping surface. At 9.5 in length, they cover six full M-LOK slots but can be cut for customized length or to combine colors. Includes two Covers per package.

M-LOK Type 2 Rail Covers are low-profile, two-piece covers that install directly onto most M-LOK aluminum hand guards (non-polymer). This pack of six M-LOK covers is non-orientation specific, which allows the user to mount them in any direction desired without affecting function. Not compatible with MAGPUL MOE M-LOK, MOE SL and SGA forends, and may not be compatible with free-float hand guards that have a wider and flatter profile, as they will not seat deep enough to allow the center portion to lock in. Featuring beveled contours to minimize potential snagging, our TSP texture for additional grip, and with a protrusion only slightly more than 1/8 from the mounting surface to maintain its low-profile. The center locking tab is pre-scored to allow the user to snap off sections and mix and match colors for a customized look. Includes six panels, each covering one M-LOK slot.

M-LOK Type 2 Rail Covers are low-profile, two-piece covers that install directly onto most M-LOK aluminum hand guards (non-polymer). This pack of six M-LOK covers is non-orientation specific, which allows the user to mount them in any direction desired without affecting function. Not compatible with MAGPUL MOE M-LOK, MOE SL and SGA forends, and may not be compatible with free-float hand guards that have a wider and flatter profile, as they will not seat deep enough to allow the center portion to lock in. Featuring beveled contours to minimize potential snagging, our TSP texture for additional grip, and with a protrusion only slightly more than 1/8 from the mounting surface to maintain its low-profile. The center locking tab is pre-scored to allow the user to snap off sections and mix and match colors for a customized look. Includes six panels, each covering one M-LOK slot.

M-LOK Type 2 Rail Covers are low-profile, two-piece covers that install directly onto most M-LOK aluminum hand guards (non-polymer). This pack of six M-LOK covers is non-orientation specific, which allows the user to mount them in any direction desired without affecting function. Not compatible with MAGPUL MOE M-LOK, MOE SL and SGA forends, and may not be compatible with free-float hand guards that have a wider and flatter profile, as they will not seat deep enough to allow the center portion to lock in. Featuring beveled contours to minimize potential snagging, our TSP texture for additional grip, and with a protrusion only slightly more than 1/8 from the mounting surface to maintain its low-profile. The center locking tab is pre-scored to allow the user to snap off sections and mix and match colors for a customized look. Includes six panels, each covering one M-LOK slot.

Made in the USA, The M-LOK T-Nut Replacement Set is a replacement hardtare pack designed for use with all M-LOK accessories. Made of 4140 Chromoly Steel with a Mil-Spec Manganese Phosphate finish, the hardware set is supplied with two T-Nuts as well as two different length button-head cap screws to ensure compatibility with various hand guard or forend thicknesses. A self-locking reusable thread patch is added to the screws to ensure a secure fit upon installation.

Made in the USA, the M-LOK Tripod Adapter for metal M-LOK compatible hand guards or forends mounts directly onto any tripod head equipped with the common Manfrotto RC2/Q2 interface. This adapter allows the user to mount their rifle directly to a tripod head without the use of any additional saddles. It is compatible exclusively with Manfrotto products using RC2/Q2 rapid connect adapter, directly mounts to metal M-LOK hand guards and forends (not intended for use with polymer hand guards or forends), and features beveled ends and corners. It also features Cammed T-Nuts,Recoil/impact mitigation lug, and covers only two M-LOK slots.

The MOE SL AK Grip (MOE Slim Line) is a drop-in upgrade for AK47/AK74 pistol grips with a more vertical angle optimized for these shorter LOP weapons that bring the primary hand in closer to the shooter's body. With an aggressive TSP texture for positive weapon control along with modern ergonomics, the MOE SL AK Grip provides a slightly smaller size and slimline feel compared to our full-size grips.

The Magpul Suppressor Cover 5.5 is the first product of its kind able to stand up to the extreme temperatures caused by extended strings of semiautomatic and automatic fire to protect the user and equipment against burns while also speeding up the cooling process. Constructed of a heat-resistant polymer sleeve overlaid onto a raised stainless steel heat shield that mounts directly to the suppressor body with steel clamps, the cover minimizes heat transfer to keep external cover temperatures up to 1000 degrees F cooler than the surface of the suppressor and allows cooling airflow across the can. Additionally, it serves as an enhanced thermal insulator and signature reduction device, significantly mitigating mirage distortions to the shooter's sight picture, reducing the likelihood of impact damage to the suppressor body, and lessening the chance of accidental heat-related injury or damage to personnel or equipment during weapon firing and cool down. Optimized for 1.5 outer diameter round suppressors with a body length of approximately 5.5 (not including attachment hardware /interface) such as the Surefire SOCOM556-RC2. Made in USA.

The Magpul Suppressor Cover 5.5 is the first product of its kind able to stand up to the extreme temperatures caused by extended strings of semiautomatic and automatic fire to protect the user and equipment against burns while also speeding up the cooling process. Constructed of a heat-resistant polymer sleeve overlaid onto a raised stainless steel heat shield that mounts directly to the suppressor body with steel clamps, the cover minimizes heat transfer to keep external cover temperatures up to 1000 degrees F cooler than the surface of the suppressor and allows cooling airflow across the can. Additionally, it serves as an enhanced thermal insulator and signature reduction device, significantly mitigating mirage distortions to the shooter's sight picture, reducing the likelihood of impact damage to the suppressor body, and lessening the chance of accidental heat-related injury or damage to personnel or equipment during weapon firing and cool down. Optimized for 1.5 outer diameter round suppressors with a body length of approximately 5.5 (not including attachment hardware /interface) such as the Surefire SOCOM556-RC2. Made in USA.