The SureFire Bore Rods are intended for concentricity check prior to firing suppressed on a new platform. The rod most closely represents the bullet flight path and will show any issue of alignment if present. Recommended to verify barrel to adapter to suppressor alignment for any new build or any previously unshot setup. Choose the corresponding rod for your caliber rifle or carbine. - Precision machined rods for most accurate verification - For validation of set-up prior to first round fired - Specific caliber rods for the most popular options on the market today. - Simply insert rod through the mounted suppressor of an unloaded weapon. Equal space should be seen between bore of suppressor and centered rod. - Made in the USA

The SureFire Bore Rods are intended for concentricity check prior to firing suppressed on a new platform. The rod most closely represents the bullet flight path and will show any issue of alignment if present. Recommended to verify barrel to adapter to suppressor alignment for any new build or any previously unshot setup. Choose the corresponding rod for your caliber rifle or carbine. - Precision machined rods for most accurate verification - For validation of set-up prior to first round fired - Specific caliber rods for the most popular options on the market today. - Simply insert rod through the mounted suppressor of an unloaded weapon. Equal space should be seen between bore of suppressor and centered rod. - Made in the USA

Front and rear sight installation tools for Glock pistols - Remove install or adjust factory or after-market sights - Approved for use with tritium night sights - Compatible with suppressor height sights - Compatible with pistol Red-Dot sight mounts (TG8950G1 / TG8950G2)

Easily removes/installs Glock front sights.

Removes GLOCK factory magazines - Easily change base plates and replace springs - Compatible with GLOCK 42/43 single stack magazines with factory finger extension - Made from machined aircraft aluminum

Holds pistol components during maintenance and disassembly - Easily remove pins on most pistols rifles and shotguns - Integrated magnet holds pins and small parts - Non-marring polymer material won't harm the pistol's finish - Solvent safe won't fade wear or crack when exposed to common gun cleaning chemicals - 1911 barrel bushing tool and main spring removal tool included - Compatible with Glock 2 3 or 4 pin trigger assemblies

When mounting optics precision is the name of the game and there's one piece of gear that's critical to success the Weaver Modular Level system. This system is a simple yet effective way to guarantee a scope's crosshairs are level to the receiver. This ensures accuracy and helps shooters maximize their optics investment.

Take gunsmithing to the next level with the Wheeler 100 Piece Professional F.A.T. Wrench Screwdriver Set. The combination of our iconic F.A.T. Wrench with 98 screwdriver bits and adapters make this set a gunsmith's dream. With a torque range of 10-65 in-lbs the F.A.T. Wrench is ideal for a variety of fastening jobs. Both the F.A.T. Wrench and the driver handle feature a texturized rubber grip to create a comfortable and secure hold. - INCLUDED F.A.T. WRENCH ACHIEVES PERFECT TORQUE WITHOUT CAUSING DAMAGE TO THE FASTENER - MOLDED CASE ORGANIZES BITS AND DRIVERS - BITS ARE COATED IN BLACK PHOSPHATE TO PREVENT RUST - HOLLOW-GROUND FLAT BITS CREATE PRECISE FIT TO PREVENT DAMAGE TO SCREWS AND FIREARMS

Look no further for the ultimate screwdriver set. The Wheeler 100 Piece Professional Screwdriver Set is the perfect addition to any tool box or work bench. Our largest bit assortment includes SAE/Metric nut drivers hollow-ground flats Phillips Torx SAE/Metric Hex bits and more. Short and extended driver handles allow for multiple applications while their texturized rubber handles create a comfortable secure grip. The entire kit is organized in a custom molded case so the perfect bit is easy to find. - INCLUDES SHORT AND EXTENDED DRIVERS WITH TEXTURED RUBBER HANDLES FOR ENHANCED GRIP AND COMFORT - MOLDED CASE ORGANIZES BITS AND DRIVERS - BITS ARE COATED IN BLACK PHOSPHATE TO PREVENT RUST

Small but mighty the Wheeler 36 Piece Spacesaver Screwdriver Set provides a convenient assortment of SAE and Metric Hex Torx Phillips and Flat bits perfect for common household tasks. The drive handle features a texturized rubber grip for a secure hold and a magnetized tip for easily changing bits. - CONVENIENT COMPACT SIZE IS PERFECT FOR STORAGE IN RANGE BAGS VEHICLES ETC - MOLDED CASE ORGANIZES BITS AND DRIVER - BITS ARE COATED IN BLACK PHOSPHATE TO PREVENT RUST

Screwdrivers are one of the most important and most used gunsmithing tools. Wheeler's 43 Piece Gunsmithing Screwdriver Set belongs on every gunsmithing bench. Unlike other screwdriver suppliers Wheeler's engineers measured the screws on over one hundred modern and antique firearms to make sure that we offered bits for every situation. Whether you are working on a Browning Superposed a Remington 700 a Smith & Wesson revolver or a Colt single action you will find that there is a bit to fit every screw on your gun. - HOLLOW-GROUND FLAT BITS CREATE PRECISE FIT TO PREVENT DAMAGE TO SCREWS AND FIREARMS - TEXTURED RUBBER HANDLES FOR ENHANCED COMFORT AND GRIP - MOLDED CASE ORGANIZES BITS AND DRIVERS - BITS ARE COATED IN BLACK PHOSPHATE TO PREVENT RUST

The Wheeler 65 Piece Hex/Torx Screwdriver Set features a full assortment of SAE/Metric Hex and Torx bits. With a texturized rubber grip the driver handle provides a comfortable and secure hold while tightening fasteners. The magnetized tip makes changing bits fast and easy. Also included is the 4mm Precision MicroDriver perfect for smaller jobs. The sturdy molded case keeps the bits organizedand protected. - INCLUDES PRECISION MICRO-DRIVER FOR EYEGLASSES KNIFE CLIPS OR OTHER SMALL FASTENERS - MOLDED CASE ORGANIZES BITS AND DRIVERS - BITS ARE COATED IN BLACK PHOSPHATE TO PREVENT RUST

The last screwdriver set you'll ever need the Wheeler 89 Piece Professional Gunsmithing Screwdriver Set has it all. Unlike other screwdriver suppliers Wheeler's engineers measured the screws on over one hundred modern and antique firearms to make sure that we offered bits for every situation. Whether you are working on a Browning Superposed a Remington 700 a Smith & Wesson revolver or a Colt single action you will find that there is a bit to fit every screw on your gun. - HOLLOW-GROUND FLAT BITS CREATE PRECISE FIT TO PREVENT DAMAGE TO SCREWS AND FIREARMS - INCLUDES SHORT AND EXTENDED DRIVERS WITH TEXTURED RUBBER HANDLES FOR ENHANCED COMFORT AND GRIP - BITS ARE COATED IN BLACK PHOSPHATE TO PREVENT RUST

There is no longer a need for a tool box at the range when you have the Wheeler Delta Series Compact Multi-Tool. With a satin finish and stainless steel construction this tool is not only handy but durable. The multi-tool design can be used to perform many different functions in the field or at the range. When you need to make adjustments to your rifle or scrape some carbon build-up simply reach down and grab this all in one tool out of the included nylon belt sheath and go to work. After you are finished snap the tool back in and continue shooting. - Fits compact into nylon belt sheath (included) - Multi-tool design to perform many different functions in the field - Satin-finish stainless steel construction - Features an AR Carbon Multi-Scraper Tool 5/64? Hex 7/64? Hex 1/8? Hex Pivot and takedown punch #2 Phillips bolt waist scraper interior BCG scraper T10 Torx T15 Torx T20 Torx A2 front sight tool 3/16? Flat 3/4? Wrench 1/2? Wrench and a castle nut wrench

The Wheeler AR-15 Armorer's Kit has been engineered and designed with both the DIY gun builder and the seasoned professional gunsmith in mind. This 18-piece kit of professional-grade tools contains all the essential tools that you need to completely build and maintain an AR-15. Each tool in this collection is purpose-built for precision and reliability giving you the confidence that you have the right tools for the job. From installing springs and detents in lower receivers muzzle devices and handguards rest assured this kit has it covered. No more worries about damaged or misplaced tools with the latching hard case that ensures that your tools remain protected and organized wherever you go. - Professional Armorer's Grade Kit Built From the Ground Up for the DIY Gun-Builder or Professional Gunsmith? - 18-Piece Kit Includes all the Tools for Maintaining and Building an AR-15? - Latching Hard Case with Handle Keeps Contents Protected and Secure During Transport - Product Contents: - 1/2'' Torque Wrench?? - AR-15 Roll Pin Install Tool Kit?? - AR-15 Armorer's Bench Block?? - AR-15 Pivot Pin Installation Tool? - AR-15 Magwell Vise Block?? - Upper/Pic Rail Vise Block?? - AR-15 Upper Receiver Action Rod?? - Professional Armorer's Wrench

Wheeler's Delta Series Professional Armorer's Wrench is designed to be the last wrench you'll need for building your perfect rifle. This tool is what every gunsmith or armorer needs to be able to build or repair their AR-15. It's constructed from the highest quality materials delivering you the best performance for all your gunsmithing needs at a great value.

The Wheeler Pro Series Ultimate AR-15 Armorer's Kit has been engineered and designed with both the DIY gun-builder and the seasoned professional gunsmith in mind. This 28-piece kit of professional-grade tools redefines what it means to build maintain accurize and customize an AR-15. Each tool in this comprehensive collection is purpose-built for precision and reliability giving you the confidence that you have the right tools for the job. From installing springs and detents in a lower receiver lapping upper receivers for accuracy or torqueing down muzzle devices and handguards rest assured this kit has it covered. No more worries about damaged or misplaced tools with the premium latching hard case that ensures that your tools remain protected and organized wherever you go. - Features - Professional Armorer's Grade Kit Built From the Ground Up for the DIY Gun Builder or Professional Gunsmith? - 28-Piece Kit Includes all the Tools Needed to Build Accurize and Maintain an AR-15? - Premium Latching Hard Case with Handle Keeps Contents Protected and Secure During Transport - Product Contents: - 1/2 Drive XL F.A.T. Wrench? - Complete Set of Multi-Function Crowfoot Wrenches - AR-15 Roll Pin Install Tool Kit - Upper Receiver Lapping Kit - AR-15 Armorer's Bench Block - Gas Block Taper Pin Removal Tool - AR-15 Pivot and Roll Pin Installation Tool - AR-15 Magwell Vise Block - Upper/Pic Rail Vise Block - AR-15 Upper Receiver Action Rod - Latching Hard Case with Handle

The Wheeler XL F.A.T. Wrench with Mil-Spec Crowfoot Set is a must-have for any DIY gun builder or professional gunsmith looking to build mil-spec AR-15s and LR308's. The set includes the XL F.A.T. Wrench that adjusts from 10-150 ft-lbs. providing more than enough torque required to complete any AR-15/ LR308 build function with precision and confidence. Whether you're attaching accessories assembling upper and lower receivers or performing routine maintenance you can be confident that the XL F.A.T. Wrench Crowfoot Set will deliver consistent and accurate torque every single time. At the core of the kit are 3 multi-function crowfoot wrenches that perform 8 different tasks thanks to their innovative dual-ended design. These professional-grade hardened steel wrenches are specifically crafted to stand up to the rigors of AR-15/LR308 assembly maintenance and modification; empowering you to tackle any AR building task. All the contents are neatly organized and secured in a premium latching hard case. - Set Includes: - XL F.A.T. Wrench - AR-15/LR308 Mil-Spec Barrel Nut Crowfoot Wrench - 5/8-3/4 Buffer Tube Muzzle Device Crowfoot Wrench - Castle Nut Crowfoot Wrench - Latching Hard-Sided Case - Features - Essential Kit for DIY Gun Builders and Gunsmiths Installing and Maintaining Mil-Spec AR-15/LR308 Components - Ratcheting Torque Wrench Delivers 10-150 Ft-Lb Torque Range Needed For High Torque Applications - Professional-Grade Hardened Steel Crowfoot Wrenches Withstand Extreme Use and Resist Bending - Premium Latching Hard Case Organizes and Protects Contents Keeping Them Secure and Protected During Transport and Storage - Three Versatile Dual-Ended Crowfoot Wrenches Perform 8 Functions

The Wheeler XL F.A.T. Wrench with Complete Crowfoot Set is the ultimate kit for the in-home or professional gunsmith looking to build AR-15's and LR-308's with mil-spec or aftermarket components. The set includes the XL F.A.T. Wrench that adjusts from 10-150 ft-lbs. providing more than enough torque required to complete any AR-15/LR308 build function with precision and confidence. Whether you're attaching accessories assembling upper and lower receivers or performing routine maintenance you can be confident that the XL F.A.T. Wrench Crowfoot Set will deliver consistent and accurate torque every single time. At the core of the kit are 5 multi-function crowfoot wrenches that perform 12 different tasks thanks to their innovative dual-ended design. These professional-grade hardened steel wrenches are specifically crafted to stand up to the rigors of AR-15/LR308 assembly maintenance and modification; empowering you to tackle any AR building task. All the contents are neatly organized and secured in a premium latching hard case. - Set Includes: - XL F.A.T. Wrench - AR-15/AR-10/LR308 Mil-Spec Barrel Nut Crowfoot Wrench - 5/8-3/4 Buffer Tube Muzzle Device Crowfoot Wrench - Castle Nut Crowfoot Wrench - Latching Hard-Sided Case - Features - Complete Kit for DIY Gun Builders and Gunsmiths Installing and Maintaining Mil-Spec and Aftermarket AR-15/LR308 Components - Ratcheting Torque Wrench Delivers 10-150 Ft-Lb Torque Range Needed For High Torque Applications - Professional-Grade Hardened Steel Crowfoot Wrenches Withstand Extreme Use and Resist Bending - Premium Latching Hard Case Organizes and Protects Contents Keeping Them Secure and Protected During Transport and Storage - Five Versatile Dual-Ended Crowfoot Wrenches Perform 12 Functions

Wheeler's Digital F.A.T. Wrench (Firearm Accurizing Torque) brings precise torque settings to the handheld torque wrench market. This digital handheld torque wrench lets you apply repeatable accurate torque settings to scope bases and rings action screws and more. The audible and visual indicators let the user know exactly when the desired torque setting has been achieved. The large range of 15-100 in-lbs. will aid in accurately torqueing screws to recommended specifications. The Digital F.A.T. Wrench includes 10 bits built to last made from phosphate-coated S2 tool steel hardened to 56-58 Rockwell C. The included custom-molded case is perfect for storing the wrench and bits when not in use.

Wheeler FAT Wrench 2023 Variant Black and Gold Includes Case and 10 Bits

Have the bits you need on hand with the Wheeler Micro Multi-Driver Tool Pen. Its convenient shape fits comfortably in your hand and is equipped to hold 5 of your most used bits. The aluminum constructed handle keeps the bits internally and can be changed quickly by simply pulling the bit out of the exposed end and pushing it through the top of the handle. This tool also comes with a bit holder to conveniently store up to 12 unused bits. - Aluminum construction handle that holds 5 bits internally - Hex Metric (H0.9 H1.3 H1.5 H2) - Slotted (SL1.5 SL2 SL2.5 SL3) - Phillips (PH00 PH0 PH1 - Torx and Torx Security (T5 T6 T7 TR8 TR9 TR10)

Store all your key sets in one place with the Wheeler 45-Piece Key Set. This compact set takes up little space on your workbench and will allow for you to store all SAE Metric Hex and Torx Keys together. Never again will you have to dig around for odd or different sizes simply open your kit turn to the page you need and continue working. - SAE Hex (.028 .035 .05 1/16 5/64 3/32 7/64 1/8 9/64 5/32 3/16 7/32 1/4 5/16 3/8) - Metric Hex (.7mm .9mm 1.3mm 1.5mm 2mm 2.5mm 3mm 4mm 4.5mm 5mm 5.5mm 6mm 7mm 8mm 10mm) - Torx (T1 T2 T3 T4 T5 T6 T7 T8 T9 T10 T15 T20 T25 T30 T35)

Complete your workbench with the Wheeler 30-Piece P-Handle Driver Set. The sleek molded stand design paired with its ability to be mounted on the wall allow for quick convenient access to the SAE Hex Metric Hex and Torx drivers. This screwdriver set is the perfect addition to any workshop. - Molded stand can sit on bench top or has mounting holes on back for hanging - SAE Hex (3/32 7/61 1/8 ball 9/64 ball 5/32 ball 3/16 ball 7/32 ball 1/4 ball 5/16 ball 3/8 ball) - Metric Hex (1.5mm 2mm ball 2.5mm ball 3mm ball 4mm ball 5mm ball 6mm ball 7mm ball 8mm ball 10mm ball) - Torx (T7 T8 T9 T10 T15 T20 T25 T27 T30 T40

Anti-Cant Indicator Pic Rail Attachment Keeping your scope perfectly aligned is critical to long-range accuracy. Canting your scope even just a couple of degrees can cause error in point of impact. With modern Drop-Compensating scopes an Anti-Cant Indicator is a necessity. If your gun isn't aligned correctly dialing up the turrets or using hold-over marks will just throw your shot off. This error can easily be enough to cause misses. The Wheeler Anti-Cant Indicator ensures that your rifle is always held near perfectly vertical eliminating any chance for Cant Error to cause a miss. Attaches securely to any Pic Rail and is tunable with the precision leveling set screw. Indicates precise repeatable level gun position Increases accuracy by insuring proper gun alignment which is critical for turret adjustment and hold over for bullet drop compensation Easy-to-view from shooting position Attaches to any Pic Rail and aligns with precision leveling set screw Folds in when not in use Precision machined aluminum with anodized finish.