The next generation of the Bren the Bren 2 Ms makes first landfall in the US in pistol form with multiple barrel lengths and two chamberings. Whereas the 805 Bren was designed to a specific set of requirements set out by the Czech military the Bren 2 is a clean-sheet design. With a bevy of changes the most noticeable is sure to be the strict weight-loss regimen that the Bren 2 has undergone. With a trimmed-down aluminum receiver and a lower made from carbon fiber-reinforced polymer the result is a robust but substantially lighter gun. - Gone is the reciprocating charging handle replaced with one that stays stowed in the forward position until it is needed. Swappable from side to side it does double duty as a forward assist. Also added is an AR-style bolt catch/release system that is mirrored on both sides of the firearm as well as a catch/release nestled into the front of the trigger guard. The magazine release and safety are also ambidextrous and located in very familiar locations for anyone versed in the AR platform. - Chambered in 223 and 7.6239 each is available in several barrel lengths. AR-15 style magazines are used for 223 variants whereas in 7.62 the factorys magazines are used to ensure last round hold-open and consistent feeding. All variants are swappable to different barrel lengths and chamberings and also feature a modular forend that can be swapped to different lengths. - In pistol form the Bren 2 Ms comes with a flush rear plate that has the provision for attaching a AR-style buffer tube for the installation of an arm brace cheek rest or similar pistol stabilizing device. For those who wish to SBR a Carbine buffer tube and stock can be installed or the entire rear plate can be removed and replaced with a factory folding/adjustable stock. - Chambering: 7.62x39 - Magazine Capacity: 30 - Magazine Type: Detachable - Frame: Carbon Fiber-reinforced Polymer - Grips: Stippled - Sights: Folding adjustable - Barrel Length: 14.17 in - Barrel: Cold Hammer Forged - Weight: 5.86 lbs - Overall Length: 25.8 in - Safety: Ambidextrous Manual Safety

The next generation of the Bren the Bren 2 Ms makes first landfall in the US in pistol form with multiple barrel lengths and two chamberings. Whereas the 805 Bren was designed to a specific set of requirements set out by the Czech military the Bren 2 is a clean-sheet design. With a bevy of changes the most noticeable is sure to be the strict weight-loss regimen that the Bren 2 has undergone. With a trimmed-down aluminum receiver and a lower made from carbon fiber-reinforced polymer the result is a robust but substantially lighter gun. - Gone is the reciprocating charging handle replaced with one that stays stowed in the forward position until it is needed. Swappable from side to side it does double duty as a forward assist. Also added is an AR-style bolt catch/release system that is mirrored on both sides of the firearm as well as a catch/release nestled into the front of the trigger guard. The magazine release and safety are also ambidextrous and located in very familiar locations for anyone versed in the AR platform. - Chambered in 223 and 7.6239 each is available in several barrel lengths. AR-15 style magazines are used for 223 variants whereas in 7.62 the factorys magazines are used to ensure last round hold-open and consistent feeding. All variants are swappable to different barrel lengths and chamberings and also feature a modular forend that can be swapped to different lengths. - In pistol form the Bren 2 Ms comes with a flush rear plate that has the provision for attaching a AR-style buffer tube for the installation of an arm brace cheek rest or similar pistol stabilizing device. For those who wish to SBR a Carbine buffer tube and stock can be installed or the entire rear plate can be removed and replaced with a factory folding/adjustable stock. - Chambering: 7.62x39 - Magazine Capacity: 30 - Magazine Type: Detachable - Frame: Carbon Fiber-reinforced Polymer - Grips: Stippled - Sights: Folding adjustable - Barrel Length: 9.05 in - Barrel: Cold Hammer Forged - Weight: 5.46 lbs - Overall Length: 20.7 in - Safety: Ambidextrous Manual Safety

Pistol will have a fiber optic front sight with black out rear for easy acquisition trigger job with CZC hammer 14# mainspring 85 gunsmith fit trigger thin aluminum grips

Built from scratch at CZ Custom the A01 is the evolution of the Shadow series as Angus would have done it. - The frame is the star of the show and is hammer-forged CNC-machined and then blued. Very obvious is its massively heavy dustcover which kills both recoil and muzzle rise. - With a deep beavertail undercut trigger guard raised 25 LPI checkering and an internal magwell it combines classic CZ 75 ergonomics with purpose-driven features ideal for competition. - To ensure that the trigger is up to snuff both the hammer and the sear are directly pinned in the frame to solidify trigger pull consistency. DA pull weight is from 8-8.5 lbs while SA clocks in at 3-3.5 lbs and a short reset is standard. - The trigger itself is lifted from the CZ 85 Combat. - The slide is CNCed from 4140 bar stock and features front and rear serrations CZ Custom low-mount rear sight and fiber-optic front. - Icing on the cake is a 3.854 Match-grade bull barrel made from 416 stainless steel. - Built for the higher capacity P-09/P-07/P-10 magazine platform the A01-C ships with two 15-round P-07 magazines. - Made in Mesa AZ USA.

The frame is the star of the show and is hammer-forged CNC-machined and then blued. Very obvious is its massively heavy dustcover which kills both recoil and muzzle rise. - With a deep beavertail undercut trigger guard raised 25 LPI checkering and an internal magwell it combines classic CZ 75 ergonomics with purpose-driven features ideal for competition. - To ensure that the trigger is up to snuff both the hammer and the sear are directly pinned in the frame to solidify trigger pull consistency. DA pull weight is from 8-8.5 lbs while SA clocks in at 3-3.5 lbs . - The SD features the CZC Ghost Competition hammer CZC short reset disconnector CZC 85 gunsmith trigger CZC extended firing pin CZC low mount .365 fixed rear sight and fiber optic front. - The short dustcover offers a balance that is more in the hand and offer quick target transistions. - The slide is CNCed from 4140 bar stock and features front and rear serrations CZ Custom low-mount rear sight and fiber-optic front. - Icing on the cake is a 4.925 Match-grade bull barrel made from 416 stainless steel. - With empty magazine the pistols weight 47 ounces - Built for the higher capacity P-09/P-07/P-10 magazine platform the A01-SD ships with two 19-round P-09 magazines.

A01 LD 9mm Pistol - Built from scratch at CZ Custom the A01 is the evolution of the Shadow series as Angus would have done it. - The frame is the star of the show and is hammer-forged CNC-machined and then blued. Very obvious is its massively heavy dustcover which absorbs recoil and minimize muzzle rise. - With a high cut beavertail and undercut triggerguard 25 LPI checkering and an internal magwell it combines classic CZ 75 ergonomics with features ideal for competition. - To ensure that the trigger is up to snuff both the hammer and the sear are directly pinned in the frame to solidify trigger pull consistency. DA pull weight is from 8-8.5 lbs. while SA clocks in at 3-3.5 lbs. and a short reset is standard. - The slide is CNCed from 4140 bar stock and features front and rear serrations and CZ Custom low-mount rear sight and fiber-optic front. Icing on the cake is a 4.925 match-grade bull barrel made from 416 stainless steel. - Built for compatibility with the higher capacity P-09/P-07/P-10 magazine platform the A01-LD ships with two 19-round magazines. - The pistol is made and assembled in Mesa AZ USA.

Built from scratch at CZ Custom the A01 is the evolution of the famous Shadow series. The frame is hammer-forged and CNC machined with a immensely heavy dustcover to virtually eliminate muzzle rise and felt recoil. With a deep beavertail undercut triggerguard raised 25 LPI checkering and an internal magwell it combines classic CZ 75 ergonomics with purpose-driven features ideal for competition. To ensure that the trigger is up to CZ Custom standards both the hammer and the sear are directly pinned in the frame to solidify trigger pull consistency. DA pull weight is 8-8.5 lbs while SA clocks in at 3-3.5 lbs with a tactile and short reset; all the while featuring a trigger lifted directly from the renowned CZ 85 Combat. The slide is CNC machined from 4140 bar stock and features front and rear serrations as well as CZ Custom low-mount rear sight and fiber-optic front. Featuring a 4.925 match-grade bull barrel made from 416 stainless steel the CZ AO1-LD can deliver accurate groups shot after shot.

CZC A01-LD OR Pistol 9mm - Built from scratch at CZ Custom the A01 is the evolution of the Shadow series as Angus would have done it. - The frame is the star of the show and is hammer-forged CNC-machined and then blued. Very obvious is its massively heavy dustcover which kills both recoil and muzzle rise. - With a deep beavertail undercut trigger guard raised 25 LPI checkering and an internal magwell it combines classic CZ 75 ergonomics with purpose-driven features ideal for competition. - To ensure that the trigger is up to snuff both the hammer and the sear are directly pinned in the frame to solidify trigger pull consistency. DA pull weight is from 8-8.5 lbs while SA clocks in at 3-3.5 lbs and a short reset is standard. - The trigger itself is lifted from the CZ 85 Combat. - The slide is CNCed from 4140 bar stock and features front and rear serrations CZ Custom low-mount rear sight and fiber-optic front. - Icing on the cake is a 4.925 Match-grade bull barrel made from 416 stainless steel. - Built for the higher capacity P-09/P-07/P-10 magazine platform the A01-SD ships with two 19-round P-09 magazines. - Made in Mesa AZ USA.

Built from scratch at CZ Custom the A01 is the evolution of the Shadow series as Angus would have done it. - The frame is the star of the show and is hammer-forged CNC-machined and then blued. Very obvious is its massively heavy dustcover which kills both recoil and muzzle rise. - With a deep beavertail undercut trigger guard raised 25 LPI checkering and an internal magwell it combines classic CZ 75 ergonomics with purpose-driven features ideal for competition. - To ensure that the trigger is up to snuff both the hammer and the sear are directly pinned in the frame to solidify trigger pull consistency. DA pull weight is from 8-8.5 lbs while SA clocks in at 3-3.5 lbs . - The SD features the CZC Ghost Competition hammer CZC short reset disconnector CZC 85 gunsmith trigger CZC extended firing pin CZC low mount .365 fixed rear sight and fiber optic front. - The short dustcover offers a balance that is more in the hand and offer quick target transistions. - The slide is CNCed from 4140 bar stock and features front and rear serrations CZ Custom low-mount rear sight and fiber-optic front. - Icing on the cake is a 4.925 Match-grade bull barrel made from 416 stainless steel. - With empty magazine the pistols weight 47 ounces - Built for the higher capacity P-09/P-07/P-10 magazine platform the A01-SD ships with two 19-round P-09 magazines. - Made in Mesa AZ USA.

CZC A01-SD Optic Ready Pistol 9mm - Built from scratch at CZ Custom the A01 is the evolution of the Shadow series as Angus would have done it. - The frame is the star of the show and is hammer-forged CNC-machined and then blued. Very obvious is its massively heavy dustcover which kills both recoil and muzzle rise. - With a deep beavertail undercut trigger guard raised 25 LPI checkering and an internal magwell it combines classic CZ 75 ergonomics with purpose-driven features ideal for competition. - To ensure that the trigger is up to snuff both the hammer and the sear are directly pinned in the frame to solidify trigger pull consistency. DA pull weight is from 8-8.5 lbs while SA clocks in at 3-3.5 lbs and a short reset is standard. - The trigger itself is lifted from the CZ 85 Combat. - The slide is CNCed from 4140 bar stock and features front and rear serrations CZ Custom low-mount rear sight and fiber-optic front. - Icing on the cake is a 4.925 Match-grade bull barrel made from 416 stainless steel. - Built for the higher capacity P-09/P-07/P-10 magazine platform the A01-SD ships with two 19-round P-09 magazines. - Made in Mesa AZ USA.