GP100 WILEY CLAPP II 357MAG 3 1789

Fully padded construction - Durable 600D polyester upper - 1200D Water resistant lower - Non-slip material for elbow and knee - Sewn in bipod pre-load ledge - Zippered pouches - Carry handle - Bullet tray - Dope card sleeve - Corner grommets for staking down

Reduces the visual mirage caused by heat radiating off a rifle's suppressor during shooting - 1000D nylon - Heat resistant inner fiberglass and silicon lining - Tether line prevents cover from sliding forward during shooting

GRAY SHIRT WITH BLACK VORTEX EMBLEM, MEDIUM

GRAY T-SHIRT WITH BLACK VORTEX EMBLEM

GRAY T-SHIRT WITH BLACK VORTEX EMBLEM 3XL

The Griffin Armament 30SD muzzle devices interface with our 30SD and M4SD series of silencers as well as the QD Blast Shield. - 30SD muzzle devices provide high performance mounting option for Griffin QD Silencers as well as a 30 caliber interface for the QD Blast Shield. The Flash Comp Flash Suppressor and Muzzle Brake were made with the same performance features as their 5.56mm counterparts but with a 5/8x24 threaded interface and integral overtravel stops. An additional pin is pre-fit for pin and weld applications. The gunsmith only needs to screw the muzzle device on and press the rear pin flush for pinning and welding. The 30SD Muzzle Brake is included with the 30SD silencer. CNC Machined and outside diameter ground from high strength corrosion and wear resistant 17-4 precipitation hardened stainless steel the 30SD muzzle brake is black oxide finished. 5/8x24 threads offer compatibility with most 7.62mm firearms on the market. - Includes shim set. - Diameter: .863 - OAL: 2.770 Added (2.15) - Weight: 3.2 ounces - Materials: 17-4PH Stainless Steel - Finish: Black Oxide - Attachment: 5/8x24 Thread - Ambidextrous QD Mount - Free of wear prone geometry - Functionally engineered for maximum performance - Sacrificial baffle to extend the life of your suppressor (excludes Flash Supp.) - 17-4 PH Stainless steel to withstand hard use - Lustrous and durable Melonite QPQ finish - Griffin Laser Logo Marked - 5/8x24 industry standard Thread Pitch for most 7.62mm firearms - Shim set Included - Integral Over-Travel stop pin - Compatible with 30SD M4SD series silencers and QD Blast Shield

The CAM-LOK Carry Comp was developed to provide concealed carry gun owners using the CAM-LOK barrel adapters with enhanced recoil mitigation and muzzle control without unnecessary weight and bulk. Adding only a few tenths of an inch in length beyond a typical thread protector the patent pending CAM-LOK Carry Comp provides brute strength and gas direction with its close dimensioned 17-4SS ported baffle face. Significantly reducing recoil decreases split times between shots while improving group sizes. Its minimal size and weight ensure that the CAM-LOK Carry Comp will not significantly print on concealed carry clothing like other comps or burden the end user with unnecessary weight. Wrench flats provide the user with the ability to use a 11/16 socket to torque the device into place*. A taper inside the device secures it to the CAM-LOK barrel adapters. The CAM-LOK Carry Comp offers and affordable solution to CAM-LOK end users desiring recoil mitigation when suppressors are not in use. - 17-4 Stainless Steel - Compatible with CAM-LOK barrel adapters - Patent Pending Design - Black Nitride finish resists surface wear & corrosion while providing increased surface hardness - Decreases recoil increases muzzle control and provides fast follow up shots! - Wrench flats for easy installation - Inside taper locks compensator onto adapter - Available in 9mm and 45 cal versions

Griffin Armament is proud to introduce DUAL-LOK our newest QD mounting system for rifle suppressors. The DUAL-LOK system is comprised from two parts the DUAL-LOK Mount and the DUAL-LOK muzzle device (of your choice). This page is for the DUAL-LOK Stealth Flash Hider 2.25. - The muzzle device integrates 60 machined mounting position grooves which is doubled by the mount's two locking positions hence the double entendre DUAL-LOK. How is this achieved? The mounts' two locking positions are machined out of phase of one another by 3 degrees which provides the 120 effective locking positions and ensures a tightly mounted and locked suppressor. When the suppressor is installed only one of the two positions will generally function by allowing the spring to push the locking collar rearward over the splines. - Time intensive R&D resulted in a high performance 3 prong flash hider with incredible resonance reduction. These suppress flash extremely well and do not ring or ping when fired hence stealth. CNC Machined of heat treated 17-4 ph stainless steel material and Melonite QPQ treated ensures durable corrosion free service life. - Diameter: 1.07 [grooves] .93 [unit] - OAL: 2.34 - Weight: 3.3 oz - Materials: 17-4PH Stainless Steel - Finish: QPQ Nitride - Key points - Utility patent pending - Wear free mounting system requires no consumable parts - Anti-Resonance flutes to prevent pinging under fire - Taper lock interface ensures security and accuracy - 120 effective positions ensure a rock-solid suppressor mount and provide extremely low POI shift - 2.25 length - Pre-drilled for pinning & welding 14.5 barrels to 16 OAL - 17-4 PH Stainless steel - Nitrided for increased surface hardness corrosion and wear resistance - wrench flats on muzzle devices - No timing or shims required

SPECS : - Diameter: 1.5 - Overall Length: 7 - Length Added: 5.6 when using included Minimalist Brake 4.6 when using longer devices - Weight: 12.6 Ounces - Materials: High strength high temperature corrosion resistant 17-4PH Stainless Steel - Attachment: DUAL-LOK Mounts - DB Rating: (139DB) 16 308win AR10 (125DB) 9.5 300BLK SUB (136DB) 11.5 5.56mm Griffin MK1 - Finish: High Temp Cerakote - Full Auto Rated: Yes - FEATURES : - Utility patents pending - Wear free mounting system requires no consumable parts - Taper lock interface ensures security and accuracy - ACME thread provides speed of attachment - Locking ring incorporates 3 anti-rotation teeth to eliminate inadvertent loosening - 120 effective positions ensure a rock-solid suppressor mount and provide extremely low POI shift - 17-4 stainless steel & 718 Inconel - Laser welded tubeless design - Patent pending flash reducing and flow optimized end cap - DUAL-LOK Minimalist Brake 5/8x24 7.62mm (.30 cal) Included - wrench flats on muzzle devices - Collar Nitrided black for increased surface hardness corrosion and wear resistance - Suppressor body H900 heat treated and Cerakoted - Perpetual Lifetime Warranty

This DUAL-LOK Mount interfaces with all DUAL-LOK series silencers. (DUAL-LOK 5 DUAL-LOK 7 HRT-556 and HRT-762) - Constructed of 17-4 PH stainless steel the DUAL-LOK EZ-Brake features 3 radial slots which provide effective recoil mitigation. The DUAL-LOK EZ-brake weighs 2.5 ounces making it one of the lightest mounts available for the DUAL-LOK Interface. The lighter weight reduces suppressor system weight while making the host firearm barrel lighter and more responsive to the shooter. The EZ-Brake does not require timing and will interface with a 13/16 standard socket wrench for installation. - Diameter: 1.075 [splines] .93 [unit] - OAL: 1.4 - Weight: 2.5 ounces - Materials: 17-4PH Stainless Steel - Finish: Black Nitride - Radial slots provide recoil mitigation with no timing required - Taper and DUAL-LOK retention ring ensures solid lock up and minimal/repeatable POI shift - 17-4 PH Stainless steel - Lustrous Black Nitride Finish

Griffin Armament is proud to introduce DUAL-LOK our newest QD mounting system for rifle suppressors. The DUAL-LOK system is comprised from two parts the DUAL-LOK HUB Mount and the DUAL-LOK muzzle device (of your choice). This page is for the DUAL-LOK Minimalist Stealth Flash Suppressor. - The muzzle device integrates 60 machined mounting position splines which is doubled by the mounts two locking positions hence the double entendre DUAL-LOK. How is this achieved? The mounts two locking positions are machined out of phase of one another by 3 degrees which provides the 120 locking positions and ensures a tightly mounted and locked suppressor. When the suppressor is installed only one of the two positions will function by allowing the spring to push the locking collar rearward over the splines. - Constructed of 17-4 PH stainless steel the DUAL-LOK Minimalist Stealth Flash Suppressor has 3 flash suppressing tines which have anti-reasonance features integrated. The Minimalist Stealth Flash Suppressor weighs 2.4 ounces substantially lighter than that of most competing flash suppressor mounts. The lighter weight reduces suppressor system weight while making the host firearm barrel lighter and more responsive to the shooter. The flash suppressor does not require timing. - Diameter: 1.075 [splines] .93 [unit] - OAL: 1.9 - Weight: 2.4 ounces - Materials: 17-4PH Stainless Steel - Finish: QPQ - KEY POINTS : - Utility patent pending - Wear free mounting system requires no consumable parts - Anti-Resonance flutes to prevent pinging under fire - Taper lock interface ensures security and accuracy - 120 effective positions ensure a rock-solid suppressor mount and provide extremely low POI shift - Lighter than most market competitive flash suppressor mounts - 17-4 PH Stainless steel - Nitrided black for increased surface hardness corrosion and wear resistance - wrench flats on muzzle devices - No timing or shims required

Griffin Armament is proud to introduce DUAL-LOK our newest QD mounting system for rifle suppressors. The DUAL-LOK system is comprised from two parts the DUAL-LOK HUB Mount and the DUAL-LOK muzzle device (of your choice). This page is for the DUAL-LOK Minimalist Stealth Flash Suppressor. - The muzzle device integrates 60 machined mounting position splines which is doubled by the mount's two locking positions hence the double entendre DUAL-LOK. How is this achieved? The mounts' two locking positions are machined out of phase of one another by 3 degrees which provides the 120 locking positions and ensures a tightly mounted and locked suppressor. When the suppressor is installed only one of the two positions will function by allowing the spring to push the locking collar rearward over the splines. - Constructed of 17-4 PH stainless steel the DUAL-LOK Minimalist Stealth Flash Suppressor has 3 flash suppressing tines which have anti-reasonance features integrated. The Minimalist Stealth Flash Suppressor weighs 2.4 ounces substantially lighter than that of most competing flash suppressor mounts. The lighter weight reduces suppressor system weight while making the host firearm barrel lighter and more responsive to the shooter. The flash suppressor does not require timing. - Diameter: 1.075 [splines] .93 [unit] - OAL: 1.9 - Weight: 2.4 ounces - Materials: 17-4PH Stainless Steel - Finish: QPQ - Key points - Utility patent pending - Wear free mounting system requires no consumable parts - Anti-Resonance flutes to prevent pinging under fire - Taper lock interface ensures security and accuracy - 120 effective positions ensure a rock-solid suppressor mount and provide extremely low POI shift - Lighter than most market competitive flash suppressor mounts - 17-4 PH Stainless steel - Nitrided black for increased surface hardness corrosion and wear resistance - wrench flats on muzzle devices - No timing or shims required

Griffin Armament is proud to introduce DUAL-LOK our newest QD mounting system for rifle suppressors. The DUAL-LOK system is comprised from two parts the DUAL-LOK HUB Mount and the DUAL-LOK muzzle device (of your choice). This page is for the DUAL-LOK Minimalist Stealth Flash Suppressor. - The muzzle device integrates 60 machined mounting position splines which is doubled by the mount's two locking positions hence the double entendre DUAL-LOK. How is this achieved? The mounts' two locking positions are machined out of phase of one another by 3 degrees which provides the 120 locking positions and ensures a tightly mounted and locked suppressor. When the suppressor is installed only one of the two positions will function by allowing the spring to push the locking collar rearward over the splines. - Constructed of 17-4 PH stainless steel the DUAL-LOK Minimalist Stealth Flash Suppressor has 3 flash suppressing tines which have anti-reasonance features integrated. The Minimalist Stealth Flash Suppressor weighs 2.4 ounces substantially lighter than that of most competing flash suppressor mounts. The lighter weight reduces suppressor system weight while making the host firearm barrel lighter and more responsive to the shooter. The flash suppressor does not require timing. - Diameter: 1.075 [splines] .93 [unit] - OAL: 1.9 - Weight: 2.4 ounces - Materials: 17-4PH Stainless Steel - Finish: QPQ - Key points - Utility patent pending - Wear free mounting system requires no consumable parts - Anti-Resonance flutes to prevent pinging under fire - Taper lock interface ensures security and accuracy - 120 effective positions ensure a rock-solid suppressor mount and provide extremely low POI shift - Lighter than most market competitive flash suppressor mounts - 17-4 PH Stainless steel - Nitrided black for increased surface hardness corrosion and wear resistance - wrench flats on muzzle devices - No timing or shims required

SPECS : - Diameter: 1.5 - Overall Length: 5.9 - Length Added: 4.5 when using included Minimalist Brake 3.5 when using longer devices - Weight: 14.4Ounces - Materials: High strength high temperature corrosion resistant 17-4PH Stainless Steel & 718 Inconel - Attachment: DUAL-LOK Mounts - DB Rating: (135.6db) 11.5 Griffin MK1 (134db) 16 Griffin MK1 - Finish: High Temp Cerakote - Full Auto Rated: Yes - FEATURES - Utility patents pending - Wear free mounting system requires no consumable parts - Taper lock interface ensures security and accuracy - ACME thread provides speed of attachment - Locking ring incorporates 3 anti-rotation teeth to eliminate inadvertent loosening - 120 effective positions ensure a rock-solid suppressor mount and provide extremely low POI shift - 17-4 stainless steel & 718 Inconel - Traditional Tube Design with internal flash hiding characteristics - Patent pending ECO-FLOW baffle system for reduced blow back - Patented flash reducing end cap - DUAL-LOK Minimalist Brake 1/2x28 5.56mm (.22 cal) Included - wrench flats on muzzle devices - Collar Nitrided for increased surface hardness corrosion and wear resistance - Suppressor body H900 heat treated and Cerakoted - Perpetual Lifetime Warranty

Griffin Armament is proud to introduce DUAL-LOK our newest QD mounting system for rifle suppressors. The DUAL-LOK system is comprised from two parts the DUAL-LOK Mount and the DUAL-LOK muzzle device (of your choice). This page is for the DUAL-LOK Titanium Minimalist Brake. - The muzzle device integrates 60 machined mounting position grooves which is doubled by the mount's two locking positions hence the double entendre DUAL-LOK. How is this achieved? The mounts' two locking positions are machined out of phase of one another by 3 degrees which provides the 120 effective locking positions and ensures a tightly mounted and locked suppressor. When the suppressor is installed only one of the two positions will generally function by allowing the spring to push the locking collar rearward over the splines. - Constructed of 17-4 PH stainless steel the DUAL-LOK Minimalist Brake has a wear resistant baffle that increases suppressor service life. Additionally the brake features compensating ports that help reduce muzzle climb while assisting in reducing felt recoil. The Minimalist Brake weighs 2.6 ounces and is less than an 1.5 long adding minimal weight and length compared to that of most competing suppressor mounts. The lighter weight reduces suppressor system weight while making the host firearm barrel lighter and more responsive to the shooter. Each brake comes with a shim set for timing. - The 6.5mm option allows for optimal braking performance and sound performance with a suppressor on 6.5 grendel 6.5 creedmoor 260 remington 6.5x47 Lapua etc. - Diameter: 1.07 [grooves] .93 [unit] - OAL: 1.42 - Weight: 2.3 oz - Materials: 17-4 Stainless Steel - Finish: QPQ Nitrided - Key points : - Utility patent pending - Wear free mounting system requires no consumable parts - Taper lock interface ensures security and accuracy - 120 effective positions ensure a rock-solid suppressor mount and provide extremely low POI shift - Sacrificial baffle to extend the service life of your silencer - Lighter than most market competitive suppressor mounts - 17-4 PH Stainless steel - Nitrided for increased surface hardness corrosion and wear resistance - wrench flats on muzzle devices - Shim set Included

Our OTB (over the barrel) muzzle devices interface with our OTB Silencers The RSTA and SPR. This two-piece welded design will be sure to impress your friends. Automated welds provide aesthetically pleasing and rugged design and functional characteristics. The Paladin R muzzle brake is integrated into this modern twist on a Griffin classic. R implies the reverse braking motion that kills recoil and keeps your shots on target. Enjoy. - Length: 4.15 - Material: 17-4 PH SS - Weight: 4.2 ounces - Attachment: 1/2x28 or 5/8x24 threads - Finish: Black Oxide - Free of wear prone geometry - 17-4 PH stainless to withstand hard use - Lustrous black oxide finish - Griffin Laser Logo Marked - Industry Standard thread pitches - Shim set Included - Compatible with SPR and RSTA Silencers

Our OTB (over the barrel) muzzle devices interface with our OTB Silencers The RSTA and SPR. This two-piece welded design will be sure to impress your friends. Automated welds provide aesthetically pleasing and rugged design and functional characteristics. The Paladin R muzzle brake is integrated into this modern twist on a Griffin classic. R implies the reverse braking motion that kills recoil and keeps your shots on target. Enjoy. - Length: 4.15 - Material: 17-4 PH SS - Weight: 4.2 ounces - Attachment: 1/2x28 or 5/8x24 threads - Finish: Black Oxide - Free of wear prone geometry - 17-4 PH stainless to withstand hard use - Lustrous black oxide finish - Griffin Laser Logo Marked - Industry Standard thread pitches - Shim set Included - Compatible with SPR and RSTA Silencers

Griffin Taper Mounts interface with RECCE PALADIN Sportsman Optimus and Bushwhacker series silencers. (Revolution and Resistance series compatibility with appropriate adapters) - Constructed of 17-4 PH stainless steel the Taper Mount EZ Brake features 6 radial slots which provides effective recoil mitigation. The Taper Mount EZ brake weighs 2.0 ounces making it one of the lightest mounts available for the Taper Mount Interface. The lighter weight reduces suppressor system weight while making the host firearm barrel lighter and more responsive to the shooter. The EZ Brake does not require timing and will interface with a 13/16 standard socket wrench for installation. Taper Mount Thread Protector is compatible with this muzzle device for added protection of thread mounts. - Diameter: 1.075 [taper] .93 [unit] - OAL: 1.4? - Weight: 2.0 ounces - Materials: 17-4PH Stainless Steel - Finish: Black Nitride - Radial slots provide recoil mitigation with no timing required - Taper ensures solid lock up and minimal/repeatable POI shift - 17-4 PH Stainless steel - Lustrous Black Nitride Finish

Griffin Taper Mounts interface with RECCE PALADIN Sportsman Optimus and Bushwhacker series silencers. (Revolution and Resistance series compatibility with appropriate adapters) - Constructed of 17-4 PH stainless steel the Taper Mount EZ Brake features 6 radial slots which provides effective recoil mitigation. The Taper Mount EZ brake weighs 2.0 ounces making it one of the lightest mounts available for the Taper Mount Interface. The lighter weight reduces suppressor system weight while making the host firearm barrel lighter and more responsive to the shooter. The EZ Brake does not require timing and will interface with a 13/16 standard socket wrench for installation. Taper Mount Thread Protector is compatible with this muzzle device for added protection of thread mounts. - Diameter: 1.075 [taper] .93 [unit] - OAL: 1.4? - Weight: 2.0 ounces - Materials: 17-4PH Stainless Steel - Finish: Black Nitride - Radial slots provide recoil mitigation with no timing required - Taper ensures solid lock up and minimal/repeatable POI shift - 17-4 PH Stainless steel - Lustrous Black Nitride Finish

Griffin Taper Mounts interface with RECCE PALADIN Sportsman Optimus and Bushwhacker series silencers. (Revolution and Resistance series compatibility with appropriate adapters) - Constructed of 17-4 PH stainless steel the Taper Mount EZ Brake features 6 radial slots which provides effective recoil mitigation. The Taper Mount EZ brake weighs 2.0 ounces making it one of the lightest mounts available for the Taper Mount Interface. The lighter weight reduces suppressor system weight while making the host firearm barrel lighter and more responsive to the shooter. The EZ Brake does not require timing and will interface with a 13/16 standard socket wrench for installation. Taper Mount Thread Protector is compatible with this muzzle device for added protection of thread mounts. - Diameter: 1.075 [taper] .93 [unit] - OAL: 1.4? - Weight: 2.0 ounces - Materials: 17-4PH Stainless Steel - Finish: Black Nitride - Radial slots provide recoil mitigation with no timing required - Taper ensures solid lock up and minimal/repeatable POI shift - 17-4 PH Stainless steel - Lustrous Black Nitride Finish

Front Sight 12 o'clock base and fastener included. - Griffin armament is proud to introduce affordable Micro Modular Sights compatible with Picatinny rail systems. Griffin M2 sights offer an industry first patent pending modular base plate system. Constructed from QPQ Treated 17-4 and ordnance grade steel Griffin M2 Sights were designed to be the correct product for every backup sight application. - A shooter can use these durable low profile sights in a 12 o'clock mounted application while having the flexibility to reconfigure them to ambidextrous 45 degree angle sights using the alternate and available angle plates. This flexibility ensures these sights can be used by anyone and will never end up in a box of undesirable legacy kit. The full M2 deployment kit includes the front and rear sight assemblies as well as both vertical and angled bases for a complete modular system. However sights and bases are available separately for users who wish to buy parts as needed. The front A2 sight provides elevation adjustment while ensuring maximum aftermarket support for your favorite post be it tridium fiber optic match grade or otherwise. An extremely low profile snag resistant slotted rear windage screw affords easy but more importantly secure adjustability. - Robust spring tension of both front and rear flip up assemblies ensures accurate repeatability every time the sight towers are actuated. - Never before has a product in this category offer this degree of flexibility. Griffin M2 Sights have a minimal foot print and are among the smallest backup sights on the market. For a mere 2 and half ounces your rifle can be equipped with a durable iron sight system to provide aiming capability in rain snow or fog on or off axis without dependence on batteries or glass. - 17-4 stainless steel - Melonite QPQ treated - 12 o'clock plate included - Fastener included - A2 sight post compatible

Rear Sight 12 o'clock base and fastener included. - Griffin armament is proud to introduce affordable Micro Modular Sights compatible with Picatinny rail systems. Griffin M2 sights offer an industry first patent pending modular base plate system. Constructed from QPQ Treated 17-4 and ordnance grade steel Griffin M2 Sights were designed to be the correct product for every backup sight application. - A shooter can use these durable low profile sights in a 12 o'clock mounted application while having the flexibility to reconfigure them to ambidextrous 45 degree angle sights using the alternate and available angle plates. This flexibility ensures these sights can be used by anyone and will never end up in a box of undesirable legacy kit. The full M2 deployment kit includes the front and rear sight assemblies as well as both vertical and angled bases for a complete modular system. However sights and bases are available separately for users who wish to buy parts as needed. The front A2 sight provides elevation adjustment while ensuring maximum aftermarket support for your favorite post be it tridium fiber optic match grade or otherwise. An extremely low profile snag resistant slotted rear windage screw affords easy but more importantly secure adjustability. - Robust spring tension of both front and rear flip up assemblies ensures accurate repeatability every time the sight towers are actuated. - Never before has a product in this category offer this degree of flexibility. Griffin M2 Sights have a minimal foot print and are among the smallest backup sights on the market. For a mere 2 and half ounces your rifle can be equipped with a durable iron sight system to provide aiming capability in rain snow or fog on or off axis without dependence on batteries or glass.

Griffin Taper Mounts interface with RECCE PALADIN Sportsman and Optimus series silencers. The Minimalist series supports the Optimus 9 Mid-Size configuration as well as Optimus micro with taper extension. - Constructed of 17-4 PH stainless steel the Taper Mount Minimalist flash suppressor has 3 flash suppressing tines which have anti-reasonance features integrated. The Minimialist flash suppressor weighs 2.9 ounces approximately 40% less than that of most competing flash suppressor mounts. The lighter weight reduces suppressor system weight while making the host firearm barrel lighter and more responsive to the shooter. The flash suppressor does not require timing. Taper Mount Thread Protector is compatible with this muzzle device for added protection of thread mounts. - Diameter: 1.075 [taper] .93 [unit] - OAL: 1.8 - Weight: 2.9 ounces - Materials: 17-4PH Stainless Steel - Finish: QPQ - Anti-Resonance flutes to prevent pinging under fire - Taper ensures solid lock up and minimal/repeatable POI shift - 40% lighter than most market competetive suppressor mounts - 17-4 PH Stainless steel - Lustrous Melonite Finish

CAM-LOK (Covert Application Mount-Locking) Patented Universal QD piston attachment system - 3 mounting positions 120 degrees separated for rapid mounting - Forward taper surface locks in place with interfacing piston and drastically reduces or eliminates common baffle/end cap strikes - Coarse threads are top cut to increase durability and wear resistance - 3/4or 19mm wrench pattern accommodates socket wrench for secure and easy installation - Compatible with Universal QD pistons (sold separately) - Internal bore reduces side concussion and visual disturbance vs blind muzzle - Total system weight is identical to legacy direct thread pistons - QPQ Nitride finish for attractive durable black finish - 17-4 stainless steel material - Also supports Universal Carry Comp