Dual chamber brake for maximum reduction in muzzle climb - Constructed from 416 Stainless - Finish Options: Blast or Black Nitride - Weight: 12 oz - Diameter: 2.25 - Diameter hole: .410 - Made for thread pitch 24MM / M14X1LH / 1/2X28-9MM - Made in the USA - Lifetime Warranty

Fixed postion - Features 5 QD sling attachments - Stock is made from Hard Coat Anodized 6061 Aluminum - Extremely rigid design - Adds 8.75 to overall firearm length - Complete assembly weight: 8 oz. - Velcro strap included but not shown on photos - Made in the USA - Midwest Industries Lifetime Warranty

ARM Brace designed for pistols with 1.2 diameter tube - Features QD sling swivel - Fits MI-AK-ALPHA-FS/MI-AK-ALPHA-FBS/MI-AK-ALPHA-FBSF/MI-STAP-SF-PB/MI-STAP-PB - Ambidextrious design - Hard Coat Anodized 6061 Aluminum - Made in the USA

Compatible with Benelli M4 and clones - Allows mounting of Aimpoint T1 T2 H1 H2 and clones - Lower 1/3 co-witness which allows the use of standard iron sights through a red dot - Provides a super clean OEM look - Weight: 1.4 oz - Constructed from Hard Coat Anodized 6061 Aluminum for a lifetime of service - Includes optic mounting screws - Reuses factory M4 rail screws or 2x Benelli screw part number 143990A and 2x Washer 1439610A - 100% Made in the USA with a lifetime warranty

Compatible with Beretta 1301 Mod 1 & Mod 2 - Does NOT fit A300 Ultima Patrol - 14 5/8 overall length - 12.2oz installed - M-LOK Compatible - 6061 Aluminum Type 3 Hard Coat Anodized - 5-Slot Polymer M-LOK rail included - Fully Dehorned and Deburred - Made in the USA - Lifetime Warranty

Directs muzzle blast forward on short barrel rifles and pistols. Does not reduce recoil or flash. - Constructed from 6061 aluminum and hardcoat anodized for a lifetime of service - 1/2-28 threads for 5.56/.223 rifles - Includes new crush washer - Overall length 3.375 - Outside diameter 1.2 - Weight 3.2 oz - 100% made in the U.S.A. - Lifetime Warranty

For AR15/M4/M16 Rifles and other platforms - Mil-Spec sight height - M4 sight picture - Uses standard A2 front sight post - Billet machined from T6 6061 aluminum - Hardcoat anodized - 1.5 MOA per click adjustments - Weight 1.1oz

MI COMBAT RAIL HD M-LOK HANDGUARD 10.5

MI COMBAT RAIL HD M-LOK HANDGUARD 13.5

MI COMBAT RAIL HD M-LOK HANDGUARD 9.25

Made from high-quality G10 materials - M-LOK compatible panel - Available in colors that simulate traditional lever gun stocks to bring to modern accessories - Available in Grey Black / Green Black / Red Black color combinations - Uses index points to fit inside M-LOK Slots securely - Colors and patterns may vary - Produced in partnership with LOK Grips - Made in the USA

4140 Heat Treated Barrel Nut - Barrel Nut and Wrench Included - Features Patented 4140 Heat Treated Torque Plate - 15 overall length - 11.4 oz Installed Weight - 6061 Aluminum Type 3 Hard Coat Anodized - Continuous MIL-STD 1913 Picatinny Top rail - Two Integral Anti-Rotation QD Sling Sockets - Super Slim 1.5 Outside and 1.3 Inside Diameter - Seven Sides of M-Lok - 5-Slot Polymer M-Lok rail included - Fully Dehorned and Deburred - 100% Made in USA- Keeps America Working - MI Lifetime Warranty

4140 Heat Treated Barrel Nut - Barrel Nut and Wrench Included - Features Patented 4140 Heat Treated Torque Plate - 15 overall length - 11.5 oz Installed Weight - 6061 Aluminum Type 3 Hard Coat Anodized - Continuous MIL-STD 1913 Picatinny Top rail - Five Integral Anti-Rotation QD Sling Sockets - Super Slim 1.5 Outside and 1.3 Inside Diameter - Seven Sides of M-Lok - 5-Slot Polymer M-Lok rail included - Fully Dehorned and Deburred - 100% Made in USA- Keeps America Working - MI Lifetime Warranty

4140 Heat Treated Barrel Nut - Barrel Nut and Wrench Included - Features Patented 4140 Heat Treated Torque Plate - 15 overall length - 11.6oz Installed Weight - 6061 Aluminum Type 3 Hard Coat Anodized - MIL-STD 1913 Picatinny Top rail - Two Integral Anti-Rotation QD Sling Sockets - Super Slim 1.5 Outside and 1.3 Inside Diameter - Three Sides of M-Lok - 5-Slot Polymer M-Lok rail included - Fully Dehorned and Deburred - 100% Made in USA- Keeps America Working - MI Lifetime Warranty

Extremely rugged one piece free float design and construction - Featuring seven sides of M-LOK(TM) compatible slots - MI-SP7M Carbine - 7.25 model weighs 9.0 ounces with barrel nut - Inside diameter 1.75 inch outside diameter 2.0 inch 1.95 inch over mounting flats - High quality MIL-STD 1913 top rail T-marked for accessory location - One five slot Magpul(R) M-LOK(TM) polymer rail section included - Barrel nut wrench included - Construction from 6061 aluminum hard coat anodized for a lifetime of service - MI Lifetime Warranty - 100% Made in America - Keeps America Working - US Patent Number USD788871

Fits Henry X .44/.45 variants - Screw-in front sight compatible - Heavy-duty ghost ring for fast target acquisition - Wide windage and elevation adjustment range for use with different ammunition - Midwest Industries sight adjustment tool included - Steel rear aperture and front sight post - Features a forward-mounted sling swivel for the use of conventional hunting slings - Includes one 5-slot M-LOK rail section - Slim and lightweight for enhanced feel - Ultra-rigid design that provides multiple points of contact with the firearm - Constructed from Hard Coat Anodized 6061 Aluminum for a lifetime of service - Features full 16 inches of top Picatinny rail for lights lasers or additional accessories - Handguard length: 13.625 inches - Handguard width: 1.640 inches - Weight: 15.5oz - Patent Pending - Made in the USA with a lifetime warranty

One Piece Picatinny Scope Rail - 5 overall length - Constructed from Hard Coat Anodized 6061 Aluminum for a lifetime of service - Includes mounting screws - Made in the USA - Lifetime warranty - HX4 Specs - Works with Henry 38/357 44 Mag and 45 Colt receivers - Weight: 1.6oz

Compatible with Henry Pistol Grip rifles - Polymer cheek piece provides adjustability for use with iron sights red dots or magnified optics - Cheek piece in lowest position maintains same height as factory stock - Maintains factory length of pull. Spacer plates are an available add-on if longer length is needed - Ambidextrous design works for left- and right-hand shooters - Exclusive Midwest Industries butt pad reduces felt recoil while maintaining a secure fit in your shoulder - Features several properly placed anti-rotation QD swivel sockets. Also incorporates one standard sling swivel location and stud for versatile sling placement - MI designed grip panels give a unique look while providing ample texture if in a rainy or snowy environment - M-LOK compatible slots on either side for use with MI shell holders or M-LOK panels for aesthetics - Provides factory length of pull to fit most users - Does not add weight over factory wood stock - Grip and Stock beam made from 6061 hardcoat anodized aluminum - Weight of complete unit 1lb 8oz. - 100% made in USA - Lifetime warranty

Compatible with Henry straight-grip rifles - Polymer cheek piece provides adjustability for use with iron sights red dots or magnified optics - Cheek piece in the lowest position maintains the same height as the factory stock - Maintains factory length of pull. Spacer plates are an available add-on if a longer length is needed. - Ambidextrous design works for left and right-hand shooters - Exclusive Midwest Industries butt pad reduces felt recoil while maintaining a secure fit in your shoulder - Features several properly placed anti-rotation QD swivel sockets. Also incorporates one standard sling swivel location and stud for versatile sling placement - MI-designed grip panels give a unique look while providing ample texture in a rainy or snowy environment - M-LOK compatible slots on either side for use with MI Universal Shell Holders or M-LOK panels for aesthetics - Provides factory length of pull to fit most users - Does not add weight over factory wood stock - Grip and stock beam made from Hard Coat Anodized 6061 Aluminum - Weight of Complete Unit: 1lb 4oz. - Made in the USA - Lifetime warranty

Comes with included 6 Universal shell holders - Allows the use of multiple Midwest Industries Universal Shell Holders on MI Lever Stock - Up to 12 extra rounds of ammunition for the firearm - Lightweight skeletonized design - Made of Hard Coat Anodized 6061 Aluminum - Can orientate shell holders vertical or horiztonal - Made in the USA

*Fitting may be required. There is variation between clones and HK SP5's that may require gunsmith installation* - 1913 Picatinny adaptor for side folding stocks and braces - Simple installation - Extremely lightweight design - Features anti-rotation QD sling swivel socket - Constructed from Hard Coat Anodized 6061 Aluminum for a lifetime of service - Made in the USA - 922R Compliant - Lifetime Warranty - Compatible with HK MP5 and clones such as Century AP5/K Zenith ZF5/K and Military Arms Corporation MAC 5/K - Installed Weight MP5K-PEPA - 3oz

Ultra-Rigid Design Made to Minimize Handguard Flex - Made to reduce point of impact shift with popular lasers such as ATPIAL DBAL NGAL - 4140 Steel Heat Treated Barrel Nut- 2.250 Long - Barrel Nut and Wrench Included - Features Patented 4140 Heat Treated Torque Plate - 10.5 Top rail length - 12.4 oz Installed Weight - 6061 Aluminum Type III Hard Coat Anodized - Continuous MIL-STD 1913 Picatinny Top rail - Two Integral Anti-Rotation QD Sling Sockets - Super Slim 1.5 Outside and 1.250 Inside Diameter - Seven Sides of M-LOK - 5-Slot Polymer M-LOK rail included - Fully Dehorned and Deburred - 100% Made in USA - Keeps America Working - MI Lifetime Warranty

MI OPTIC MULTI TOOL AK FRONT SIGHT TOOL

MI OPTIC MULTI TOOL AR FRONT SIGHT TOOL

3 Slot Polymer M-Lok Rail Section